Tekglobal Technologies

Series 9260 Ex i transmitter supply units can be used for the intrinsically safe operation of transmitters or intrinsically safe mA sources such as 4- wire transmitters. The device allows HART signals to be transmitted in both directions. The portfolio includes one- and two- channel devices and a variant for signal duplication.
Universal use for transmitters and mA sources (4- wire transmitter)Slim design  12.5 mm wide for one- and two- channel versionsCan be used for functional safety levels up to SIL 2 (IEC/ EN 61508)

Isolators 9260/11-11-10sIsolators 9270Isolators 9275Isolators 9282Isolators 9260/13-11-10s
Part Number Options/Accessories

Zener barriers are a cost-eff ective solution for providing an intrinsically safe interface with field devices located in the hazardous area. As part of the intrinsic safety barrier family, Pepperl+Fuchs off ers two distinct zener barrier systems. The Z-System barriers are 12.5 mm wide and mount and ground directly to standard 35 mm DIN rail, while the SB-System barriers are the only termination board solution with pluggable modules available on the market. In addition to this wide product portfolio of housing and connection styles, we off er accessories for each application.

KCD2-SON-Ex1.R1 Switch Amplifier1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR input, 2 passive transistor outputs (resistive), Application-specific outputs, Line fault transparency (LFT), Usable as signal splitter (1 input and 2 outputs), Housing width 12.5 mm, Up to SIL 2 acc. to IEC 61508
KCD2-SON-Ex1.R2 Switch Amplifier1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR input, Application-specific outputs, Usable as signal splitter (1 input and 2 outputs), 2 passive transistor outputs (resistive), Line fault transparency (LFT), Housing width 12.5 mm, Up to SIL 2 acc. to IEC 61508

1-channel isolated barrier
• 24 V DC supply (loop powered)
• Current limit 45 mA at 10 V DC
• Up to SIL 3 acc. to IEC 61508 This isolated barrier is used for intrinsic safety applications. The device supplies power to solenoids, LEDs and audible alarms located in a hazardous area. The device is loop powered, so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltage At full load, 10 V at 45 mA is available for the hazardous area application

NBB5-18GM40-Z3-300MM-V1 NBN8-12GM65-US-V12 NBN8-18GM60-A2-V1 NBB15-30GM30-E2NEB3-8GM40-A0-V1 NEB3-8GM40-E0-V1NBB3-V3-Z5-5M-Y NCB1.5-8GM40-ZO NCB2-12GM35-NO-V1NCB2-12GM40-ZONCB5-18GM40-ZONEB22-30GM60-E2-V1 NBB2-12GM40-Z0 NBB15-30GM50-WS NBB15-30GM60-A2NBB8-18GM60-A2-V1NBB5-18GM40-Z0 NBB1.5-8GM40-Z0 NCB4-12GM35-Z4NBB15-30GM50-E0-MNBB5-18GM50-A2-V1 NBB8-18GM50-E2-M NEN20-18GM50-E3-V1NJ5-18GM50-E3-V1NCB15-30GM50-Z4  NBB5-18GM60-WS  NBB5-18GM60-WO NBN25-30GM50-US NBN30-L2-E2-V1 
NJ30+U1+DW1-1 NCN15-M1K-NONJ15S+U4+N NJ25-50-N-5M NBB5-18GM60-I3 CBN15-30GK60-E2
NBN15-30GM60-I3 CJ1-12GK-N-5M NCB5-18GM40-NO-5M NCN15-30GM40-N0- 10M    NJ4-12GM-N NJ4-12GM-N 5M NCB2-V3-NO 
NBB5-18GM60-WS NBN40-U1K-E2-3G-3D    NBB20-U1-UU

We direct all our activities to cater the expectations of customers by providing them excellent quality products as per their gratification.

P&F KCD0-SD3-EX1.1245 (304978)P&F KCD2-RR2-EX1-314455P&F KCD2-SR-EX1.LB(70112151)P&F KCD2-SR-EX2 (70112153)P+F KCD2-STC-1 (321413)P&F KCD2-STC-EX1.20 (272955)P&F KCD2-STC-EX1 (316910)P&F KCD2-STC-EX1 (70150439)P&F KCD2-UT2-EX1 (70156489)P&F KFA6-SR2-EX2.W(103373)P&F KFD0-SD2-EX1.1045 (242031)P&F KFD0-TR-EX-1 (043691)P&F KFD2-SR2-EX2.W(203355)P&F KFD2-STC5-EX1.20-239214P&F KFD2-STC5-EX1 (70124109)P&F KFU8-SR-EX2.W (204136)P&F KFU8-UFC-EX1.D (231197)P&F KFU8-USC-1.D (188750)

Large quantity of Pepperl+Fuchs Isolated Barriers K-Systems on stock

1-channel isolated barrier
 24 V DC supply (Power Rail)
 Output 45 mA at 11.2 V DC
 Logic input, non-polarized
 Error message output  Line fault detection (LFD)
 Up to SIL2 acc. to IEC 61508
This isolated barrier is used for intrinsic safety applications. It supplies power to solenoids, LEDs, and audible alarms, located in a hazardous area. It is controlled via a logic signal. The input has two defined states: 1-Signal = 16 V DC  30 V DC, 0- Signal = 0 V DC 5 V DC. At full load, 11.2 V at 45 mA is available for the hazardous area application. If the field impedance is > 10 kfor lead breakage or < 50  for short circuits a line fault is detected. During an error condition, the fault indication output deenergizes. A fault is signalized by LEDs acc. to NAMUR NE44 and a separate collective error message output.
Supplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. 
Power feed module KFD2-EB2 The power feed module is used to supply the devices with 24 V DC via the Power Rail. The fuse-protected power feed module can supply up to 100 individual devices depending on the power consumption of the devices. A galvanically isolated mechanical contact uses the Power Rail to transmit collective error messages. Power Rail UPR-03 The Power Rail UPR-03 is a complete unit consisting of the electrical inset and an aluminium profile rail 35 mm x 15 mm. To make electrical contact, the devices are simply engaged. Profile Rail K-DUCT with Power Rail The profile rail K-DUCT is an aluminum profile rail with Power Rail insert and two integral cable ducts for system and field cables. Due to this assembly no additional cable guides are necessary. Power Rail and Profile Rail must not be fed via the device terminals of the individual devices!

KFD2-CRG2-Ex1.DTransmitter Power Supply
KFD2-GUT-Ex1.DTemperature Converter with Trip Values
KFU8-CRG2-Ex1.DTransmitter Power Supply
KFU8-GUT-Ex1.DTemperature Converter with Trip Values
KFD2-WAC2-Ex1.DStrain Gauge Converter
KFD2-WAC2-Ex1.D-Y1Strain Gauge Converter


KFD0-SCS-Ex1.55SMART Current Driver/Repeater
KFD2-SCD2-Ex1.LKSMART Current Driver
KFD2-SCD2-Ex2.LKSMART Current Driver
KCD2-SCD-Ex1SMART Current Driver
KFD0-CS-Ex1.50PRepeater
KFD0-CS-Ex1.51PCurrent Driver/Repeater
KFD0-CS-Ex2.51PCurrent Driver/Repeater
KCD2-SCD-Ex1.SPSMART Current Driver
KFD0-CS-Ex2.50PRepeater
KFD2-SCD-Ex1.LKSMART Current Driver


Z713Zener Barrier
Z715Zener Barrier
Z728Zener Barrier
Z728.HZener Barrier
Z765Zener Barrier
Z778Zener Barrier
Z779Zener Barrier
Z787Zener Barrier
Z787.HZener Barrier
Z788Zener Barrier
Z788.HZener Barrier
Z928Zener Barrier
Z954Zener Barrier
Z960Zener Barrier
Z961Zener Barrier
Z961.HZener Barrier
Z964Zener Barrier
Z965Zener Barrier
Z966Zener Barrier
Z966.HZener Barrier
Z779.FZener Barrier
Z779.HZener Barrier
Z787.FZener Barrier

Z787.H.FZener Barrier
Z896Zener Barrier
Z955Zener Barrier
Z967Zener Barrier
Z040Zener Barrier
Z041Zener Barrier
Z042Zener Barrier
Z705Zener Barrier
Z710Zener Barrier
Z715.1KZener Barrier
Z715.FZener Barrier

Z722Zener Barrier
Z728.CLZener Barrier
Z728.FZener Barrier
Z728.H.FZener BarrierZ755Zener Barrier
Z757Zener Barrier
Z764Zener Barrier
Z765.FZener Barrier
Z772Zener Barrier
Z779.H.FZener Barrier
Z786Zener Barrier
Z788.RZener Barrier
Z789Zener Barrier
Z796Zener Barrier
Z810Zener Barrier
Z813Zener Barrier
Z822Zener Barrier
Z828Zener Barrier

ISOLATED BARRIERS  DIN RAIL MOUNTED
K-System isolated barriers guarantee safe, reliable, and effi cient signal transmission between your fi eld device and the control system. In addition to their inherent power limitation, these modules feature galvanic isolation between the signal loop and all other power loops. Pepperl+Fuchs off ers the most complete range of products to meet all your application and installation requirements.

KCD2-ST-Ex1.LB Switch Amplifier1-channel isolated barrier, 24 V DC supply (Power Rail), Dry contact or NAMUR input, 2 active transistor outputs, Usable as signal splitter (1 input and 2 outputs), Reversible mode of operation, Line fault detection (LFD), Housing width 12.5 mm, Up to SIL 2 acc. to IEC 61508
KFA4-SR2-Ex1.W Switch Amplifier1-channel, Control circuit EEx ia IIC, Reversible mode of operation, 1 relay contact output (change-over contact), EMC acc. to NAMUR NE 21, LB/SC monitoring, Up to SIL 2 acc. to IEC 61508/IEC 61511
 KFA4-SR2-Ex1.W.LB Switch Amplifier1-channel, Control circuit EEx ia IIC, Reversible mode of operation, Output I: relay contact output (change-over contact), Output II: optionally signal output/fault signal, EMC acc. to NAMUR NE 21, LB/SC monitoring, Up to SIL 2 acc. to IEC 61508/IEC 61511
KFA4-SR2-Ex2.W Switch Amplifier2-channel, Control circuit EEx ia IIC, Reversible mode of operation, 1 relay contact output (change-over contact) per channel, EMC acc. to NAMUR NE 21, LB/SC monitoring, Up to SIL 2 acc. to IEC 61508/IEC 61511
 KFA5-DU-Ex1.D Switch Amplifier, Timer Relay1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact and transistor output, Adjustable output timer functions from 10 ms ... 60 min, Input frequency up to 80 Hz; pulse divider up to 1 kHz, Reset function, Configurable by keypad, Line fault detection (LFD)
 KFA5-SR2-Ex2.W.IR Switch Amplifier2-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Latching relay contact output, Line fault detection (LFD)
KFA6-DU-Ex1.D Switch Amplifier, Timer Relay1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact and transistor output, Adjustable output timer functions from 10 ms ... 60 min, Input frequency up to 80 Hz; pulse divider up to 1 kHz, Reset function, Configurable by keypad, Line fault detection (LFD)
KFA6-ER-Ex1.W.LB Conductivity Switch Amplifier1-channel isolated barrier, 230 V AC supply, Level sensing input, Adjustable range 1 k .. 150 k, Relay contact output, Fault relay contact output, Adjustable time delay up to 10 s, Minimum/maximum control, Line fault detection (LFD)


P&F KCD0-SD3-EX1.1245 (304978)P&F KCD2-RR2-EX1-314455P&F KCD2-SR-EX1.LB(70112151)P&F KCD2-SR-EX2 (70112153)P+F KCD2-STC-1 (321413)P&F KCD2-STC-EX1.20 (272955)P&F KCD2-STC-EX1 (316910)P&F KCD2-STC-EX1 (70150439)P&F KCD2-UT2-EX1 (70156489)P&F KFA6-SR2-EX2.W(103373)P&F KFD0-SD2-EX1.1045 (242031)P&F KFD0-TR-EX-1 (043691)P&F KFD2-SR2-EX2.W(203355)P&F KFD2-STC5-EX1.20-239214P&F KFD2-STC5-EX1 (70124109)P&F KFU8-SR-EX2.W (204136)P&F KFU8-UFC-EX1.D (231197)P&F KFU8-USC-1.D (188750)

Ace AI-DTTRx DIN Rail Temperature Transmitter is 2 Wire Loop DIN rail Temperature Transmitters to be fitted in Panel/ DIN Rail are industry-standard devices used with RTD Pt-100 Sensors & all Thermocouples for signal transfer over a long distance with a pair of normal copper wires without EMI/RFI Interference.

Applications: Process Controllers, HVAC Industries, Bulk Drugs, Cold Chain Controls, Argo Industries, Pharma, etc

The MTLx541 provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter, which is located in a hazardous area, and repeats the current in another floating circuit to drive a safe-area load. For HART 2-wire transmitters, the unit allows bi-directional communications signals superimposed on the 4/20mA loop current. Alternatively, the MTLx541S acts as a current sink for a safe-area connection rather than driving a current into the load. Separately powered current sources, such as 4-wire transmitters, can be connected but will not support HART communication. 
613MTL4501-SR-Fail-safeSwitch/Proximitydetectorinterface16614MTL4504-Switch/Proximitydetectorinterface17615MTL4510&MTL4510B-Switch/Proximitydetectorinterface18616MTL4511-Switch/Proximitydetectorinterface22617MTL4513-Switch/Proximitydetectorinterface23618MTL4514/MTL4514B/MTL4514D-Switch/Proximitydetectorinterface24619MTL4514N-Switch/Proximitydetectorinterface256110MTL4516-Switch/Proximitydetectorinterface266111MTL4516C-Switch/Proximitydetectorinterface276112MTL4517-Switch/Proximitydetectorinterface2862DigitalOutputmodules29621MTL4521/MTL4521L-SolenoidAlarmdriver29622MTL4523/MTL4523R-SolenoidAlarmdriver30623MTL4523L-SolenoidAlarmdriver31624MTL4523V/MTL4523VL-SolenoidAlarmdriver32625MTL4524-SolenoidAlarmdriver33626MTL4524S-SolenoidAlarmdriver34627MTL4525-SolenoidAlarmdriver35628MTL4526-Switchoperatedrelay3663PulseandVibrationmodules37631MTL4531-VibrationTransducerInterface37632MTL4532-PulseIsolator38633MTL4533-VibrationTransducerInterface40(continuedonnextpage)ivINM4500/4600Rev1164AnalogueInputmodules41641MTL4541/MTL4541S/MTL4541Y-RepeaterPowerSupply41642MTL4541A/MTL4541AS/MTL4541YA-CurrentRepeater42643MTL4541B/MTL4541P/MTL4541T-RepeaterPowerSupply43644MTL4544/MTL4544S-RepeaterPowerSupply44645MTL4544A/MTL4544AS-CurrentRepeater45646MTL4544B-RepeaterPowerSupply46647MTL4544D-RepeaterPowerSupply4765AnalogueOutputmodules48651MTL4545Y/MTL4546/MTL4546C/MTL4546S/MTL4546Y-IsolatingDriver48652MTL4549/MTL4549C/MTL4549Y-IsolatingDriver4966FireandSmokeInterfacemodules50661MTL4561-FireandSmokeDetectorInterface5067TemperatureInputmodule51671MTL4573-TemperatureConverter52672MTL4575-TemperatureConverter53673MTL4576-RTD-TemperatureConverter54674MTL4576-THC-TemperatureConverter55675MTL4581-mV/ThermocoupleIsolator5668Generalmodules57681MTL4599-DummyIsolator57682MTL4599N-Generalpurposefeedthroughmodule5769PCS45/PCL45USBconfiguratorforMTLtemperatureconverters587FAULTFINDINGANDROUTINEMAINTENANCE5971Maintenanceprecautions5972Faultfinding5973Routinemaintenance598BENCHTESTINGMODULES6181DigitalInput(DI)modules6182DigitalOutput(DO)modules6283AnalogueInput(AI)Modules6384AnalogueOutput(AO)Modules65

ISOLATED BARRIERS  DIN RAIL MOUNTED
K-System isolated barriers guarantee safe, reliable, and effi cient signal transmission between your fi eld device and the control system. In addition to their inherent power limitation, these modules feature galvanic isolation between the signal loop and all other power loops. Pepperl+Fuchs off ers the most complete range of products to meet all your application and installation requirements.

P&F KCD0-SD3-EX1.1245 (304978)P&F KCD2-RR2-EX1-314455P&F KCD2-SR-EX1.LB(70112151)P&F KCD2-SR-EX2 (70112153)P+F KCD2-STC-1 (321413)P&F KCD2-STC-EX1.20 (272955)P&F KCD2-STC-EX1 (316910)P&F KCD2-STC-EX1 (70150439)P&F KCD2-UT2-EX1 (70156489)P&F KFA6-SR2-EX2.W(103373)P&F KFD0-SD2-EX1.1045 (242031)P&F KFD0-TR-EX-1 (043691)P&F KFD2-SR2-EX2.W(203355)P&F KFD2-STC5-EX1.20-239214P&F KFD2-STC5-EX1 (70124109)P&F KFU8-SR-EX2.W (204136)P&F KFU8-UFC-EX1.D (231197)P&F KFU8-USC-1.D (188750)
KFD2-SCD-EX1-LKKFD2-STC4-EX1KFD2-STC4-EX2KFD2-STC5-EX1.20KFD2-STC5-EX1KCD2-SR-EX1-LBKCD2-SR-EX2KFD2-SR2-EX1.W.LBKFD2-SR2-EX1.WKFD2-SR2-EX2KFD2-SR2-EX2.WKFD2-CD-EX1KFD2-SL2-EX1.LKKCD0-SD3-EX1.1245KFD0-CS-150KHD2-SR2-EX1.W
STT750-S-0-0-CHC-11C-B-11A0-F1-0000 STT750-S-0-C-CHT-11C-B-31A0-F1-0000STT750-S-0-0-AHC-11C-B-11A0-F1-0000STD720-E1AS4AS-1-A-AHC-11-C-B-11A0-F1-0000STD725-E1AC4AS-1-C-AHS-11C-B-11A0-F1-0000STD735-E1AC4AS-1-C-AHS-11C-B-11A0-F1-0000STG77S-E1G000-1-C-AHS-11C-B-11A0-F1-0000STG77S-E1G000-1-C-AHT-11C-B-31A0-F1-0000STD810-E1AC4AS-1-C-AHE-11C-B-11A0-F1-0000STD810-E1HC4AS-1-C-AHE-11C-B-31A0-F1-0000STG74S-E1G000-1-C-AHS-11C-B-11A0-F1-0000STG73S-E1G000-1-C-AHS-11C-B-11A0-F1-0000STD720-E1AC4AS-1-A-AHC-11-C-B-11A0-F1-0000STG870-41GS4A-1E-GHC-13C-B-31A6-FG,F1,FE,TP,PM,01-STT25H-0-000-T00-000-0D0-00-3S-0STG74L-E1G000-1-A-AHC-11C-B-11A0-F1-0000STG14L-E1G-00000-H6.SM,ZS,CC,F1,3C,MBSTD120-E1A-00000-H6.SM,ZS,CC,F1,3C,MBEJA110E-JMS5J-912EBEJA430A-EAS5A-92DA/KU22/F1EJA110A-EHS5A-92EA/KU2/E1EJA430A-EBS4A-92DA/KU2/F1/E1EJA430A-EBS4B-92EB/KU2/F1
EJA110A-ELS54A-92EAEJA110A-EHS4A-92EAEJA110A-EHS4B-22DD7KU27D37E1EJA430A-EAS4A-97EBEJA430A-EAS4A-92EAEJA530A-EDS4N-07EFEJA530A-EDS4N-02EE/KU2/D1/HACEJA530A-EBH7N-04EN/KU2/HAC/E1EJA430A-EBS4A-92EAEJA430A-EAS4A-92EBEJA118E-JMSCG-912EB-WA23B1S-WOO-AA26/AEJA310A-EMS4A-97EB/HACEJA430A-EBS4A-92EBFKGX03V5-2FCYY-BAYTA320-EA2DB/C1YTA110EA4DB/X1YTA110EA2DBEJA110EJMS4J-912EBEJX440A-ECS4G-912EBEJA110A-EHS5A-92DA/KU22/A/F1EJA510E-JAS7N-012EL/KU22644HAK5J8M5C4Q44000PSI/276 BAR3051CD2A22A1AB4M4Q4RK3051CD3A22A1AB4M4Q4RK2088G2S33A2B4Q42088G3S22A2B4Q42088G2S22A2B4Q42088G3S22A111042088G4S22A1K6B4042088G3S22A2M5Q42088G4S22A2B4I1Q42088G4S22A1K6B4Q40065C32J0080N0305A2TB0065C30J0080N0305TB1151DP4S22C2M4B1043051TG4A2B21AB4043051TG2A2B21JB4K8D4M5Q4Q8HR73051TG3A2B21JB4K8D4M5Q4Q8HR73144PD5A2K1B4M5Q4HR73051TG2A2B21434S5TR3051TG3A2B21AB4M4Q4RK644HANAJ6M4Q43051CD3A22A1AB4M4Q4RK3051CD4A22A1BB4CF4U Fuse TBCTS4UN TBS8VK-C12024S8VK-C24024S8FS-C15024J

KFD2-STC4-Ex2
< 2-channel isolated barrier
< 24 V DC supply (Power Rail)
< Input 2-wire SMART transmitters
< Output 0/4 mA ... 20 mA
< Terminals with test points
< Up to SIL 2 acc. to IEC 61508
This isolated barrier is used for intrinsic safety applications. The device supplies 2-wire SMART transmitters in a hazardous area. It transfers the analog input signal to the safe area as an isolated current value. Digital signals may be superimposed on the input signal in the hazardous or safe area and are transferred bi-directionally. If the HART communication resistance in the loop is too low, the internal resistance of 250 Ω between terminals 8 and 9 can be used. Test sockets for the connection of HART communicators are integrated into the terminals of the device.
Signal type Analog input
The device supports the following SMART protocols:
• HART
• BRAIN
• Foxboro 
Input signal 0/4 ... 20 mA
Output signal 0/4 ... 20 mA (overload > 25 mA)

We direct all our activities to cater the expectations of customers by providing them excellent quality products as per their gratification.

1-channel
• Output EEx ia IIC
• 24 V DC nominal supply voltage
• Device installation permissible in zone 2
• Conversion of current/voltage or voltage/current
• Elevation/Suppression of the "life zero"
• Accuracy 0.1 %
• EMC acc. to NAMUR NE 21 KFD2-CD-Ex1.32
The KFD2-CD-Ex1.32 transmits an electrical unit signal from the safe area to the hazardous area. The conversion of a current signal into a voltage signal and vice versa is possible. Current input option A current limit circuit in series to terminal 9 protects the device from damage. The max. voltage drop at the input is DC 4 V, allowing for the connection of several KFD2-CD32-Ex1.32 repeaters due to the low voltage drop in order to maintain multiple galvanically isolated outputs (signal duplication). Voltage input option The signal is transmitted to terminals 9 and 10 across an amplifier and the DC/DC converter within the allowable voltage range. A voltage limiter circuit protects the amplifier from incorrect input switching and overvoltage, but will draw current through a 50 mA fuse during operation. The fuse can be changed only by the manufacturer. Current output option The open circuit voltage is DC 24 V within the allowable supply voltage range at terminals 1 and 2. The max. load that can be applied is 850 ???. Voltage output option At least 20 mA is available within the allowable supply voltage range at terminals 1 and 2 which means that with 10 V output voltage, a load of at least 500 ??? must be connected
Used to drive I/P converters and valve positioners. Table: input/output options, type For options enclosed in parantheses, the transfer range for a base type is only partially used, i. e. 4 mA ... 20 mA from the base type 0 mA ... 20 mA.

NBB5-18GM40-Z3-300MM-V1 NBN8-12GM65-US-V12 NBN8-18GM60-A2-V1 NBB15-30GM30-E2NEB3-8GM40-A0-V1 NEB3-8GM40-E0-V1NBB3-V3-Z5-5M-Y NCB1.5-8GM40-ZO NCB2-12GM35-NO-V1NCB2-12GM40-ZONCB5-18GM40-ZONEB22-30GM60-E2-V1 NBB2-12GM40-Z0 NBB15-30GM50-WS NBB15-30GM60-A2NBB8-18GM60-A2-V1NBB5-18GM40-Z0 NBB1.5-8GM40-Z0 NCB4-12GM35-Z4NBB15-30GM50-E0-MNBB5-18GM50-A2-V1 NBB8-18GM50-E2-M NEN20-18GM50-E3-V1NJ5-18GM50-E3-V1NCB15-30GM50-Z4  NBB5-18GM60-WS  NBB5-18GM60-WO NBN25-30GM50-US NBN30-L2-E2-V1 
NJ30+U1+DW1-1 NCN15-M1K-NONJ15S+U4+N NJ25-50-N-5M NBB5-18GM60-I3 CBN15-30GK60-E2
NBN15-30GM60-I3 CJ1-12GK-N-5M NCB5-18GM40-NO-5M NCN15-30GM40-N0- 10M    NJ4-12GM-N NJ4-12GM-N 5M NCB2-V3-NO 
NBB5-18GM60-WS NBN40-U1K-E2-3G-3D    NBB20-U1-UU

KFD2-CRG2-Ex1.DTransmitter Power Supply
KFD2-GUT-Ex1.DTemperature Converter with Trip Values
KFU8-CRG2-Ex1.DTransmitter Power Supply
KFU8-GUT-Ex1.DTemperature Converter with Trip Values
KFD2-WAC2-Ex1.DStrain Gauge Converter
KFD2-WAC2-Ex1.D-Y1Strain Gauge Converter


KFD0-SCS-Ex1.55SMART Current Driver/Repeater
KFD2-SCD2-Ex1.LKSMART Current Driver
KFD2-SCD2-Ex2.LKSMART Current Driver
KCD2-SCD-Ex1SMART Current Driver
KFD0-CS-Ex1.50PRepeater
KFD0-CS-Ex1.51PCurrent Driver/Repeater
KFD0-CS-Ex2.51PCurrent Driver/Repeater
KCD2-SCD-Ex1.SPSMART Current Driver
KFD0-CS-Ex2.50P
Z786Zener Barrier
Z788.RZener Barrier
Z789Zener Barrier
Z796Zener Barrier
Z810Zener Barrier
Z813Zener Barrier
Z822Zener Barrier
Z828Zener Barrier
Z857Zener Barrier
Z864Zener BarrierZ878Zener BarrierZ887Zener BarrierZ888Zener Barrier
Z905Zener BarrierZ910Zener BarrierZ915Zener BarrierZ915.1KZener Barrier
Z960.FZ961.FZ966.FZ972Z978Z810.CLZ828.HZ828.H.FZ865Z865.FZ872Zener BarrierZ879.FZ879.H.FZener BarrierZ886Z887.FZener BarrierZ887.H.FZener BarrierZ888.HZener Barrier